Application of
Assembly
3 - 46
Feed unit
Application o
f
Assembly
Application of
Assembly
4. Set the shaft supporter to the feed holder, and secure it with the two screws (taptite, pan P (S/P W)
3X12).
5. Set the wahser,thrust, the outer rotary hook assy, the washer, the magnet and the washer to the shaft
supporter, and insert the outer rotary hook shaft into them, and secure them with the screw (set screw,
socket (CP) M4X6).
*Key point
• Set it so that the larger end of the feed cam on the lower shaft A assy facing backward, and set the outer
rotary hook assy with the mark facing frontward.
Set Screw, Socket (CP) M4X6
Hex wrench 2.0 mm
Taptite, Pan P (S/P W) M3X12
Outer rotary hook shaft
Washer
Magnet
Washer
Outer rotary hook assy
Taptite, pan P (S/P W) 3X12
Wahser,thrust
Shaft supporter
Feed holder
Set screw, socket (CP) M4X6
Feed cam
Outer rotary hook assy
Mark
Summary of Contents for ArtCity140
Page 2: ......
Page 148: ...6 1 6 Motor 3P supply assy 6 2 LED lead wire 6 3 Special Instructions of Wiring ...
Page 151: ......
