Brother ArtCity140 Service Manual Download Page 107

Page: 107 / 151

Application of

Assembly

3 - 49

Feed unit

Application o

Assembly

Application of

Assembly

9. Set the feed adjuster to the feed adjuster spring (XF5127) and the feed adjuster holder. And align the

two tabs of feed adjuster with the two grooves of feed adjuster holder, and turn the feed adjuster 90
degrees while pushing it in the direction of the arrow and lock it.

*Key point

• Confirm that the feed adjuster is attached in the direction of the illustration below.

10.Insert the shaft of feed arm B assy into the groove of feed adjuster, and set the feed adjuster holder to

the feed holder, and secure it with the two screws (taptite, pan P (S/P W) 3X12).

Taptite, Pan P (S/P W) 3X12

Feed adjuster spring (XF5127)

Feed holder

Feed adjuster

Groove

Feed arm B assy

Shaft

Feed adjuster spring (XF5127)

Taptite, pan P (S/P W) 3X12

Feed adjuster holder

Tab

Feed adjuster

Groove

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands