Brother ArtCity140 Service Manual Download Page 136

Page: 136 / 151

4 - 18

Adjust

ment

Adjustment

Adjustment

Feed dog position (front/back and left/right)

[Standard]

• At pattern selecting dial [10] (straight stitch/center base line/feed length: maximum), the

minimum clearance between the front of the feed dog and the needle plate should be 0.6 to
1.3 mm.

• The left and right clearance between the feed dog and the needle plate should be the same.

[Adjustment]

1. Remove the presser foot and the presser foot holder.

2. Turn the pattern selecting dial until the [10] is the topmost position.

3. Turn the pulley by hand and move the feed dog to the front position.

4. Remove the two screws of the needle plate assy, and remove the needle plate assy.

5. Loosen the two screws of the feed dog. Set the needle plate assy temporarily, and adjust the position of the

feed dog.

6. Tighten the two screws of the feed dog to secure the feed dog to the feed stand assy.

7. Tighten the two screws of the needle plate assy to secure the needle plate assy to the feed module.

Screw needle plate

Pattern
selecting dial

Pulley

Screws

Feed dog

Needle plate assy

Bolt, Socket M3X5

Feed dog

Screws
with hex wrench 2.5 mm

Parallel

0.6 - 1.3 mm

a b

a = b

Needle plate assy

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands