Application of
Disassembly
3 - 18
Feed unit
Application o
f
Disassembly
Application of
Disassembly
19.Remove the two screws (taptite, pan P (S/P W) 3X12) to remove the bushing presser from the feed
holder. And remove the lower shaft A sub assy from the feed holder.
20.Remove the retaining ring E6 to pull out the washer,thrust, the lower shaft bushing, the lower shaft
washer and the lower shaft spring (XF3479) from the lower shaft A sub assy. And remove the two
screws (set screw, socket (FT) M5X5) to remove the fixed joint from the lower shaft A sub assy.
21.Release the two hooks to remove the vertical feed shaft from the feed holder. And pull out the vertical
lever from the vertical feed shaft.
Set Screw, Socket (FT) M5X5
Hex wrench 2.5 mm
Taptite, Pan P (S/P W) 3X12
Lower shaft spring (XF3479)
Retaining ring E6
Washer,thrust
Lower shaft washer
Lower shaft bushing
Lower shaft spring
(XF3479)
Taptite, pan P (S/P W) 3X12
Bushing presser
Lower shaft A sub assy
Fixed joint
Set screw, socket (FT) M5X5
Vertical lever
Vertical feed shaft
Hooks
Feed holder
Summary of Contents for ArtCity140
Page 2: ......
Page 148: ...6 1 6 Motor 3P supply assy 6 2 LED lead wire 6 3 Special Instructions of Wiring ...
Page 151: ......
