Brother ArtCity140 Service Manual Download Page 126

Page: 126 / 151

4 - 8

Adjust

ment

Adjustment

Adjustment

Presser foot hole / Needle plate hole position (front/back)

[Standard]

The front/back direction of hole on the presser foot and the needle plate should be matched.

[Adjustment]

1. Lower the presser foot lifter and lower the presser foot.

2. Insert the screwdriver from the rear cover hole to turn the screw, and adjust the position of the presser foot

hole and the needle plate hole in the front/back direction.

*Key point

• Loosen the screw. (turn to the direction of “

”.)

→

Move the needle to the front side. (

)

• Tighten the screw. (turn to the direction of “

”.)

→

Move the needle to the rear side. (

)

Presser foot lifter

Presser foot

Cup screw M3X20

Rear cover

Screwdriver

Back side view

Screw

Needle plate hole

Presser
foot hole

Presser foot

Needle plate

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands