Brother ArtCity140 Service Manual Download Page 117

Page: 117 / 151

Application of

Assembly

3 - 59

Main frame and Covers

Application o

Assembly

Application of

Assembly

Assembly of Rear cover assy

1. Set the thread guide assy to the rear cover, and tighten the screw (taptite, cup P M4X20) temporarily.

*Key point

• Fully tighten the screw after performing

“4 - 25 Bobbin winder”

2. Set the bobbin presser to the boss of rear cover, and tighten the screw (taptite, pan P (S/P W) 3X12)

temporarily.

*Key point

• Place the bobbin presser with the smaller end facing the rear.
• Fully tighten the screw after performing

“4 - 25 Bobbin winder”

3. Attach the spool pin stand to the rear cover.

4. Set the spool pin spring to the positioning groove of rear cover.

5. Insert the spool pin into the positioning hole of the rear cover while pulling the spool pin spring.

Taptite, Cup P M4X20

Taptite, Pan P (S/P W) 3X12

Taptite, pan P (S/P W) 3X12

Thread guide assy

Taptite, cup P M4X20

Bobbin presser

Spool pin spring

Spool pin stand

Spool pin spring

Positioning groove

Spool pin

Positioning hole

Rear cover

Boss

Summary of Contents for ArtCity140
























































































































































Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands

Brother ArtCity140, Service Manual

Search results

Summary of Contents for ArtCity140

Reviews:

Related manuals for ArtCity140

Brands by name

Popular brands