Brother ADS-2000e Service Manual Download Page 12

Page: 12 / 124

Confidential

SAFETY INFORMATION

WARNING

WARNING indicates a potentially hazardous situation which, if not avoided, could result
in death or serious injuries.

CAUTION

CAUTION indicates a potentially hazardous situation which, if not avoided, may result in
minor or moderate injuries.

Important

Important indicates a potentially hazardous situation which, if not avoided, may result in
damage to property or loss of product functionality.

Prohibition icons indicate actions that must not be performed.

Electrical Hazard icons alert you to possible electrical shock.

Fire Hazard icons alert you to the possibility of fire.

Hot Surface icons warn you not to touch product parts that are hot.

Note

Notes tell you how you should respond to a situation that may arise or give tips about
how the operation works with other features.

Summary of Contents for ADS-2000e





























































































































Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands

Brother ADS-2000e, Service Manual

Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands