Brother ADS-2000e Service Manual Download

Page: 24 / 124

Confidential

4.1.9 The page counter for the separation pad has reached the limit.

The page counters for both the separation pad and
the pick-up roller have reached the limit.
The page counter for the pick-up roller has reached the limit. .................2-16

4.1.10 The front cover sensor detected an open front cover in the ready state.

The front cover sensor detected an open front cover during scanning.......... 2-16

4.1.11 Color parameter in the ROM does not match

the first side or second side CIS unit........................................................2-16

4.1.12 A scanning error occurred while scanning the image...............................2-16

4.1.13 The voltage value was below the lower limit during scanning.

The white level does not increase during scanning
although the light intensity was increased.
A white level not within the standard was scanned when the maintenance mode
function "Acquire white level data and set CIS scan area" was executed.
A black level not within the standard was scanned when the maintenance mode
function "Acquire white level data and set CIS scan area" was executed. ............2-16

4.2 Troubleshooting for Image Defects......................................................................2-17

4.2.1 Defect examples.......................................................................................2-17

4.2.2 Troubleshooting according to image defect .............................................2-17

4.3 Troubleshooting for Document Paper Feeding Problems....................................2-20

4.3.1 Multiple documents are fed ......................................................................2-20

4.3.2 Document becomes wrinkled ...................................................................2-20

4.3.3 Document becomes jammed....................................................................2-21

4.3.4 Document is not picked up and fed ..........................................................2-22

4.4 Troubleshooting for Software Problems ..............................................................2-23

4.4.1 Does not respond to operation from a computer...................................... 2-23

4.4.2 Cannot read data......................................................................................2-23

4.5 Troubleshooting for Control Panel Problems.......................................................2-24

4.5.1 Nothing is displayed on the LED ..............................................................2-24

4.5.2 Control panel is inoperable.......................................................................2-24

4.5.3 Only specified buttons are inoperable ......................................................2-24

4.6 Troubleshooting for Other Problems....................................................................2-25

4.6.1 Machine is not turned ON.........................................................................2-25

4.6.2 Unusual noise is generated from the machine .........................................2-25

4.6.3 Data cannot be saved in the USB memory ..............................................2-25

Summary of Contents for ADS-2000e





























































































































Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands

Brother ADS-2000e, Service Manual

Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands