3-26
Confidential
(11) Push the two hooks on the separation pad cover inward to open the separation pad cover.
(12) Engage the separation pad cover with the groove on the upper chute, and slide it in the
direction of arrow 12b while pulling its shaft in the direction of arrow 12a using spring peg
and other tools. Remove the slit section on the separation pad cover shaft from the rib on
the upper chute. Then remove the shaft on the left side of the separation pad cover to
remove it from the upper chute in the direction of arrow 12c.
Fig. 3-23
(13) Push both of the two hooks on the separation pad ASSY inward, and remove the
separation pad ASSY from the separation pad cover.
Fig. 3-24
Upper chute
Separation pad cover
Hook
Hook
Slit
Rib
Groove
12b
12c
12a
Hooks
Separation pad ASSY
Separation pad cover
Summary of Contents for ADS-2000e
