Brother ADS-2000e Service Manual Download Page 29

Page: 29 / 124

2-5

Confidential

2.3

Operation of Each Part

Part name

Operation

Pick-up roller / Separation

pad

Separates documents set in the document tray into single

sheets, and feeds them into the machine.

Double feeding sensor

Detects whether multiple documents are fed into the machine.

Feed roller

Feeds the document.

Eject roller

Feeds the document to the output tray.

Document detection sensor

Detects the document set in the document tray. Detects a

document jam.

Document scanning position

sensor

Detects the document scanning start position. Detects a

document jam.

Front cover sensor

Detects whether the front cover is open or closed.

Top cover sensor

Detects whether the top cover is open or closed.

Summary of Contents for ADS-2000e





























































































































Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands

Brother ADS-2000e, Service Manual

Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands