Brother ADS-2000e Service Manual Download Page 65

Page: 65 / 124

3-13

Confidential

(3) Push the two hooks on the separation arm inward to open the separation arm, and remove

the separation spring from the front cover.

(4) Push the two hooks on the front cover outward. Remove the two bosses on the separation

arm, and remove the separation arm from the front cover.

Fig. 3-5

(5) Close the separation pad cover.

Note:

• Be careful not to damage the separation arm by opening it too much.

• Do not close the front cover when the separation arm is opened to prevent the

separation arm to be damaged.

Assembling Note:

• When assembling the separation spring, engage it with ribs on the front cover and

separation pad cover.

Hook

Separation spring

Front cover

Boss

Separation arm

Boss

Hook

Rib

Separation pad cover

Rib

Separation spring

Summary of Contents for ADS-2000e





























































































































Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands

Brother ADS-2000e, Service Manual

Search results

Summary of Contents for ADS-2000e

Reviews:

Related manuals for ADS-2000e

Brands by name

Popular brands