Brooktrout Technology IRAS-24A w/ T1-RBS, Installation And Reference Manual

Page: 99 / 188

Installing the IRAS-24A Driver with Windows NT 3.51 4-31
NOTE: If you are using TCP/IP protocol and not planning
to use a DHCP server, have a “static pool” of IP
addresses available to enter in the TCP/IP
Configuration screen.
Figure 4-21 TCP/IP Configuration Screen
18. When you complete your selections, click
OK.
NOTE: If you are not sure which protocols to choose, refer
to the Windows NT Server documentation, or
click
Help.
19. Continue adding and configuring RAS ports by
selecting
Add
from the Remote Access Setup screen
(Figure 4-22). Configure the remaining COMPorts as
described in steps 12-15.