Brooktrout Technology IRAS-24A w/ T1-RBS, Installation And Reference Manual

Page: 103 / 188

Installing the IRAS-24A Driver with Windows NT 3.51 4-35
Uninstalling
Netaccess
Software Uninstalling the IRAS-24A software from your Windows NT
3.51 system is divided into three sections as follows:
❐
Removing Remote Access Service: Provides
instructions for removing RAS from your system.
❐
Removing an Installed Adapter: Provides instructions
for removing the IRAS-24A adapter from the
Netaccess Devices dialog box.
❐
Removing Netaccess Comport Software: Provides
instructions for removing all the Netaccess comport
software from your computer.
Removing Remote Access Service
To remove RAS from your server:
1. From the Program Manager, select the Main group
icon and double-click on Control Panel.
2. From the Control Panel, double-click on Network.
The Network Settings screen is displayed.
3. Highlight
Remote Access Service
from the list of
installed network software.
NOTE: If you have more than one device on your system
configured for RAS, continue with step 4. If the
IRAS-24A is the only device configured for RAS,
continue with step 6.
4. Click on
Configure
.
The Remote Access Setup screen is displayed.