Brooktrout Technology IRAS-24A w/ T1-RBS, Installation And Reference Manual

Page: 144 / 188

A-18 IRAS-24A T1/ISDN Modem Card Installation and Reference Guide
Completing the
T1-RBS
Provisioning
Worksheet The IRAS-24A driver must be configured to match the
T1-RBS service you have ordered. The following fields must
be completed with the information supplied by your service
provider. Use the “T1-RBS Provisioning Worksheet”
(Figure A-3) to record all of the required information.
NOTE: For greater ease in completing the “T1-RBS Provisioning
Worksheet”, a copy is located on the last page of the book.
If the T1-RBS service provider inquires about a feature that is
not included on Figure A-3, describe how you plan to use the
IRAS-24A card (e.g., number of users, dial out protocols used,
dial in to specific computer or to network, etc.). If the agent is
unsure of the correct value for a setting, request the default.
When you configure the IRAS-24A driver for T1-RBS service,
be prepared to fill in the following fields with the numbers
that your service provider supplies (also see Table 3-2).
❐
Trunk Type

Indicates the T1 trunk type providing
the RBS signaling.
❐
Framing Type

Changes the framing type on the
IRAS-24A card.
❐
Line Coding

Changes the line coding on the
IRAS-24A card.