Brocade Communications Systems Fabric OS v7.0.1, Command Reference Manual

Page: 856 / 1132

830 Fabric OS Command Reference
53-1001764-01
portStatsShow
22
portStatsShow
Displays port hardware statistics.
SYNOPSIS
portstatsshow [ slot /] port
portstatsshow -i [ index1 [- index2 ][...] [ -f ]]
portstatsshow -slot [ slot1 [- slot2 ][...]
portstatsshow ge [ slot /] ge port
portstatsshow ip [ slot /] ge port [ ip_address ]
portstatsshow fcip [ slot/ ] ge port [ tunnel_number ]
portstatsshow -h
DESCRIPTION
Use this command to display port hardware statistics counters. Some counters are platform- or
port-specific and display only on those platforms and ports. All statistics have a maximum 32-bit value of
4,294,967,295.
You can display statistics for a single port identified by its port number or by its port index. Port ranges
are supported with index numbers and by specifying a slot or a slot range. Use
switchShow for a listing
of valid ports, slots, and port index numbers.
Specifying multiple ports with the index ( -i) or slot ( -s ) option is supported only if PortSwap is disabled.
They are not supported on GbE ports and configured F_Port trunks. Use the -i option without a port index
to display the portSwap status, or alternately use portSwapShow .
The command output may include the following fields (Tx indicates frames transmitted by the port; Rx
indicates frames received by the port).
stat_wtx
The number of 4-byte words transmitted.
stat_wrx
The number of 4-byte words received.
stat_ftx
The number of frames transmitted.
stat_frx
The number of frames received.
stat_c2_frx
The number of class 2 frames received.
stat_c3_frx
The number of class 3 frames received.
stat_lc_rx
The number of link control frames received.
stat_mc_rx
The number of multicast frames received.
stat_mc_to
The number of multicast timeouts.
stat_mc_tx
The number of multicast frames transmitted.