Brocade Communications Systems Fabric OS v7.0.1, Command Reference Manual

Page: 130 / 1132

104 Fabric OS Command Reference
53-1001764-01
cfgShow
22
cfgShow
Displays zone configuration information.
SYNOPSIS
cfgshow [" pattern "] [, mode ]
DESCRIPTION
Use this command to display zone configuration information.
If no operand is specified, all zone configuration information (both defined and effective) is displayed. If
the local switch has an outstanding transaction, this command displays the most recently edited zone
configuration that has not yet been saved. If the local switch has no outstanding transaction, this
command displays the committed zone configuration.
If a pattern is specified, only matching configurations are displayed.
•
The defined configuration is the complete set of all zone objects that have been defined in the
fabric. There can be multiple zone configurations defined, but only one can be enabled at a time.
There might be inconsistencies in the definitions, zones, or aliases that are referenced but not
defined, or there might be duplicate members. The defined configuration is the current state of the
administrator input.
•
The effective configuration is the single zone configuration that is currently enabled. The devices
that an initiator sees in the fabric are based on this configuration. The effective configuration is built
when a specific zone configuration is enabled and all error checking has been completed
successfully.
When this command is executed after a zoning transaction was aborted on the local switch, it displays
the following warning message: "Warning: Current Zoning Transaction was aborted. Reason code =
Zone Config update received."
When default zoning is enabled with "No Access" mode, "No Effective configuration: (No Access)" is
displayed.
NOTES
The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for
details.
OPERANDS
The following operands are optional:
" pattern "
A regular expression that matches zone configuration names. The pattern must
be enclosed in quotation marks and can contain the following:
Question mark (?)
Matches any single character
Asterisk (*)
Matches any string of characters.
Range
Matches any character within the range. Ranges must be enclosed in square
brackets, for example, [0-9] or [a-f].
mode
Specify 0 to display the contents of the transaction buffer (the contents of the
current transaction) or specify 1 to display the contents of nonvolatile memory.
The default value is 0.