manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Command Reference Manual, Page: 24 / 1132

Share
Download
Brocade Communications Systems Fabric OS v7.0.1 Command Reference Manual Download Page 24

xxiv

Fabric OS Command Reference

53-1002447-01

Key terms

For definitions specific to Brocade and Fibre Channel, see the technical glossaries on the Brocade 
website. See 

“Brocade resources”

 on page xxiv for instructions on accessing the information.

For definitions of SAN-specific terms, visit the Storage Networking Industry Association online dictionary 
at: 

http://www.snia.org/education/dictionary

Notice to the reader

This document may contain references to the trademarks of the following corporations. These 
trademarks are the properties of their respective companies and corporations.

These references are made for informational purposes only.

Additional information

This section lists additional Brocade and industry-specific documentation that you may find helpful.

Brocade resources

To get up-to-the-minute information, join MyBrocade at no cost to obtain a user ID and password:

http://my.brocade.com

White papers, online demonstrations, and data sheets are available through the Brocade website at:

http://www.brocade.com/products-solutions/products/index.page

For additional Brocade documentation, visit the Brocade SAN Info Center and click the Resource Library 
location:

http://www.brocade.com 

Corporation

Referenced Trademarks and Products

Commvault

Commvault Galaxy Data Protection

EMC

RSA Key Manager (RKM)

HP

Secure Key Manager (SKM) and Enterprise Secure Key Manager 
(ESKM)

IBM

Tivoli Key Lifecycle Manager

Legato

Legato Networker

Microsoft Corporation

Windows, Windows NT, Internet Explorer

NetApp

NetApp Lifetime Key Manager (LKM)

Oracle Corporation

Oracle, Java

Symantec

Veritas NetBackup 6.5 Enterprise Server

Red Hat, Inc.

Linux

Thales

Thales Encryption Manager for Storage (TEMS)

Summary of Contents for Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments