manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Command Reference Manual, Page: 326 / 1132

Share
Download
Brocade Communications Systems Fabric OS v7.0.1 Command Reference Manual Download Page 326

300

Fabric OS Command Reference

53-1001764-01

fcrBcastConfig

22

fcrBcastConfig

Displays or sets the broadcast frame forwarding option. 

SYNOPSIS

fcrbcastconfig --show

fcrbcastconfig --enable -f

 

fabric_id

fcrbcastconfig --disable -f

 

fabric_id

fcrbcastconfig --help

DESCRIPTION

Use this command to enable or disable the broadcast frame option or to display the current configuration. 
If no operands are specified, this command displays the usage. By default, frame forward option is 
disabled. Use the 

--show

 option to display the current settings on the switch. 

NOTES

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

This command has the following operands:

--show

Shows the current broadcast configuration as enabled or disabled. If broadcast 
frame forwarding is disabled for selected FIDs, only the enabled FIDs in the 
current configuration are displayed.

--enable

Enables the frame forwarding option for a specified fabric ID.

--disable

Disables the frame forwarding option for a specified fabric ID

-f

 

fabric_id

Specifies the fabric ID to be disabled or enabled. Valid values are 1 to 128. This 
operand is required with the 

--enable

 and 

--disable

 options.

--help

Displays the command usage.

EXAMPLES

To display the current configuration:

fcr:admin> 

fcrbcastconfig --show

Broadcast configuration is disabled for all FID

To enable broadcast frame forwarding for FID 33, 28, and 2:

fcr:admin> 

fcrbcastconfig --enable -f 33

fcr:admin> 

fcrbcastconfig --enable -f 28

fcr:admin> 

fcrbcastconfig --enable -f 2

To display the new configuration:

fcr:admin> 

fcrbcastconfig --show

      

Broadcast configuration is enabled for FID:

2 33 128

To disable broadcast frame forwarding for FID 33:

fcr:admin> 

fcrbcastconfig --disable -f 33

Summary of Contents for Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments