manualshive.com logo in svg

Brocade Communications Systems Fabric OS v7.0.1, Command Reference Manual, Page: 593 / 1132

Share
Download
Brocade Communications Systems Fabric OS v7.0.1 Command Reference Manual Download Page 593

Fabric OS Command Reference

567

53-1001764-01

perfCfgRestore

2

perfCfgRestore

Restores performance monitoring configuration settings from nonvolatile memory. 

SYNOPSIS

perfcfgrestore

DESCRIPTION

Use this command to restore the performance monitoring configuration information from nonvolatile 
memory. This does not restore the information cleared by the 

perfCfgClear

 command; rather, it restores 

the configuration from nonvolatile memory. The 

perfCfgRestore

 command overwrites any configuration 

changes that were not saved. 

NOTES

This command requires an Advanced Performance Monitoring license.

This command is not supported on virtual FC ports (VE/VEX_Port), EX_Port, M (Mirror) ports and GbE 
ports.

The execution of this command is subject to Virtual Fabric or Admin Domain restrictions that may be in 
place. Refer to Chapter 1, "Using Fabric OS Commands" and Appendix A, "Command Availability" for 
details.

OPERANDS

None

EXAMPLES

To restore the performance monitoring configuration information from nonvolatile memory: 

switch:admin> 

perfcfgrestore

This will overwrite current Performance Monitoring settings

in RAM. Do you want to continue? (yes, y, no, n): [no] 

y

Please wait ...

Performance monitoring configuration restored from FLASH.

SEE ALSO

perfCfgClear

, 

perfCfgSave

 

Summary of Contents for Fabric OS v7.0.1













































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































































Reviews:

No comments