AIRCRAFT FLIGHT
MANUAL
BRISTELL B23
Document No.: ADXC-73-001-AFM
Non-approved page
Revision: A2
4-8
Date of Issue: 15.04.2021
NOTE
Oil pressure with a cold engine could be high. A maximum of 7bar is
acceptable
15. Throttle
-
adjust for smooth running at 2000
RPM
16. Choke
-
Release after engine runs
uniformly
17. Backup battery
-
OFF
18. Fuel Pump
-
OFF
CAUTION
The starter should be activated for a maximum of 10 sec., followed by 2
min. pause for starter and starter circuit cooling.
As soon as engine runs, adjust throttle to achieve smooth running at
approx. 2000 rpm. Check the oil pressure, which should increase within
10 sec.
Start the engine with the throttle lever set for idling or 5mm open at
maximum, then wait 3 sec to reach constant engine speed before new
acceleration.
4.4.4
Before Taxiing
1. Avionics switch
-
ON
2. MFD
-
Select engine screen
3. Voltage
-
Check minimum 11.0V
4. ALT-1 switch
-
ON
5. Voltage
-
Check increase, nom. 13.4V
6. ALT-2 switch
-
ON
7. Voltage
-
Check increase, nom. 13.8V,
max. 14.1V, short time peaks up
to 14.4V allowed
8. EFIS-L3 switch
-
ON
Set baro
9. Cockpit lights
-
as required (Dimmers, Day/night
switch)
10. Nav Light (at night)
-
as required
11. Landing/Taxi Light
-
as required