AIRCRAFT FLIGHT
MANUAL
BRISTELL B23
Document No.: ADXC-73-001-AFM
Non-approved page
Revision: A2
7-15
Date of Issue: 15.04.2021
7.6
Cockpit lay-out, Seats and safety harness,
Two seats are provided in side by side arrangement. Seats are Kevlar
sandwich panels with leather upholstery. The seat pans are held in place
by metal clips engaging to the main spar. The seat back rests are held in
place by a combination of form fit on the lower end. Seat belts routed
through lips at the upper end of the seat back rest. Seats are removable
for easier cleaning in the centre fuselage. Side panels are composite
sandwich, upholstered in the arm rest area. Map/AFM storage pockets
are installed on the side panel.
Seats are equipped with ETSO approved four-point safety harnesses.
Safety harnesses consist of two lap straps, two shoulder straps and a
safety harness lock. Length of the lap straps and the shoulder straps is
adjustable. The shoulder belt are routed through clips on the upper end
of the seat back rest.
NOTE
Prior to each flight, ensure that the seat belts are firmly secured to the
airframe, and that the belts are not damaged. Adjust the buckle so that it
is centred on the body.