Page 50 of 84
040-57105-01
Reset Button: If configuration has been applied but has not been
saved, clicking this button will reset the page back to previous settings.
Refresh Button: This button refreshes the page. Any changes not
save will be undone and if the partner port has changed its state, the
refreshed page will reflect it.
Users
Selecting from the navigation pane
Switch>Configuration>Security>Switch>Users will open the following screen:
Figure 31: User and Access Level
This page provides an overview of the current users. Currently the only way
to login as another user on the web server is to close and reopen the browser
User Name: The name identifying the user. NOTE: The default
configuration comes with “admin” and no password configured.
Privilege Level: The privilege level of the user. The allowed range is 1
to 15. If the privilege level is 15, the user is granted full control of the
device. User’s privilege should be same or greater than the group
privilege level to have access to that group. By default, most groups’
privilege level is configured to 5, which grants read-only access.
Privilege level 10 grants read-write access. To any system
maintenance (software upload, factory defaults and etc.), level 15 must
be assigned or granted to the group. Generally, Privilege level 15 is
granted to administrator account, privilege level 10 is granted to
standard user account and privilege level 5 is use for a guest account.
Add New User Button: Click to add a new user. Clicking this button
opens a new page that allows for new user information to be input:
