Page 15 of 84
040-57105-01
3
Local Management Access
There are two methods of accessing local management features. The first method is
through the Web Graphical User Interface (GUI), and is the primary subject of this
document.
The second method is through a Command Line Interface (CLI). The CLI allows
access to some features that are not available through the Web GUI.
This document will explain how to access the radio through both methods, but will
only include command line details that are used in the initial configuration and basic
operation of the radio.
Tools and equipment needed to access and manage the
radio.
A PC or laptop with a web browser and telnet/ssh enabled
Use an Ethernet cable, TIA 568B pin out, to connect the PC to
the radio
Connection to FLEX4G-LITE
Connect the PC to any Ethernet port on the radio as shown in Figure 1
below
Figure 2: FLEX4G-LITE Power and Data Connection
