Page 42 of 84
040-57105-01
Configuration
The configuration submenu has all the pages required to adjust the radio’s switch to
meet most applications required by today’s network standards. The many different
menu options will not be covered by the manual. However, the required parameters
and functions that will allow the radio’s switch to be integrated into most basic
networks will be cover by this manual.
System
Access to this pages: Switch> Configuration>System>
The system configuration submenu provides access to the following pages:
Information: This page contains System Contact, System Name
and System Location.
IP: This page contains the configuration required to access the
unit’s management interface via an IP address. Each IP address is
fixed to a specific VLAN ID. This allows for the configuration of
multiple IP address in different subnets, in different VLANs. The
default Mode configuration is “Host”. If the mode is change to
“Router”, the unit will allow routing between the different VLANs
configured. The following steps described the process of creating
multiple management interfaces using different VLANs.
1.
Add or created the different VLAN interfaces and configured
unique IP to each.
Access this page: Switch>System>IP
Click to add new VLAN
interfaces
