BRT_AN_079 PanL Desk Manager 2.X User Guide
Version 1.0
Document Reference No.: BRT_000377
Clearance No.: BRT#179
10
Copyright © Bridgetek Pte Ltd
Placement Guidelines:
The following guidelines pertain to the safe
installation of our device on a desk.
Ensure that the device is not placed on the
desk edges.
Ensure that the placement is visible to the
user.
If using a glass or slippery desk, ensure that
the rubber feet are in place. Use the rubber
feet to stick to the bottom of the device. The
rubber feet are provided as part of the
package.
The placement desk should be flat (Horizontal
to ground), should not be in a slanting
position.
Please do not mount the device on a vertical
wall / table.
FCC Statement:
This equipment has been tested and found to
comply with the limits for a Class B digital device,
pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection
against harmful interference in a building
installation. This equipment generates, uses and
can radiate radio frequency energy and, if not
installed and used in accordance with the
instructions, may cause harmful interference to
radio communications. However, there is no
guarantee that interference will not occur in a
particular installation. If this equipment does
cause harmful interference to radio or television
reception, which can be determined by turning the
equipment off and on, the user is encouraged to
try to correct the interference by one or more of
the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the
equipment and receiver.
Connect the equipment into an outlet on a
circuit different from that to which the receiver
is connected.
Consult the dealer or an experienced radio/TV
technician for help.
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two
conditions:
1)
This device may not cause harmful
interference, and
2)
This device must accept any interference
received, including interference that may
cause undesired operation.
FCC Radiation Exposure Statement
This device complies with FCC radiation exposure
limits set forth for an uncontrolled environment
and it also complies with Part 15 of the FCC RF
Rules. This equipment must be installed and
operated in accordance with provided instructions
and the antenna(s) used for this transmitter must
be installed to provide a separation distance of at
least 20 cm from all persons and must not be co-
located or operating in conjunction with any other
antenna or transmitter. End-users and installers
must be provided with antenna installation
instructions and consider removing the no-
collocation statement.
NOTE: This unit was tested with shielded cables. Using shielded cables, ensure that users maintain
the appropriate EMC classification for the intended environment.
Summary of Contents for PanL Desk Manager
Page 1: ......
