7.2
Equipment Repair
7.2.1 Equipment self-test
•
Whether inlet/outlet and terminal block of the equipment are connected.
•
Whether inlet/outlet lines of the equipment are damaged or exposed, and with good insulation.
•
Whether the ground wire is good, no looseness, and not overlapped with other metals.
•
Whether it sounds normal or not excessively heated of the wiring when the equipment is
running.
CAUTIOUS
Do not disassemble the equipment. If there is any problem, please contact the
agent or Bridge Technology. Bridge Technology has no liability for equipment failure
caused by
self-assembly.
7.2.2 Maintenance service
If the purchased equipment failure during the warranty period, Bridge Technology will repair the
equipment according to the specific information provided by the customer.
Contact information is on Page 05.
7.2.3
Equipment returns
If the failure is confirmed by itself rather than the connection problem, please return the power
supply to Bridge Technology to repair.
•
Please attach a note to the packing, indicating the specific description of the failure, model, and
owner of the power supply.
•
Please place the power supply in the original load carriers, properly fill the cushioning material,
and ensure that the packing box is firm.