Table 5-7
Number
Name
Note
①
Harmonic
selection box
After checking, the harmonic setting is valid.
②
Coupling box
After checking, the three-phase harmonics can be set at the
same time. If unchecked, three-phase harmonics can be set
independently.
③
A/B/C
phase
harmonic setting
Three-phase harmonic setting button, the panel is shown
in Figure 5-16 will automatically pop up after clicking it. The
user can check and set various harmonic parameters on this
panel, such as angle, content, and other parameters.
Figure 5-16 Harmonic Edit-1
5.7.2
Inter-harmonic simulation
ESA series power supply provides GUI software, which can edit inter-harmonic.
Test steps:
Click "Sequence Mode" to enter the panel, firstly set the operating parameters (such as output
voltage, frequency, etc.). Click "Apply"→"Power On"→"Output On", the power supply is on.
Check the inter-harmonic selection box (Figure 5-17①), click the inter-harmonic simulation