5.1
GUI Software Introduction
5.1.1
Operating status
ESA series provides GUI software, which is installed on the front touch screen using the
Windows OS. (the software can also be installed on the control PC connected to the power
supply). A few seconds after the power supply is initialized, the control unit and touch screen
work, the power supply is standby. If the power supply communication is normal, the white
light (Figure 3-3①) and the “connected” green light (Figure 5-1①) is always on. All functions
and parameters can be accessed through the TFT-Touch panel or GUI software to set up and
run.
Figure 5-1 Main panel
Table 5-1
Number Name
Note
①
Connect
A few seconds after the power supply is initialized, the TFT-Touch
panel displayer works, the green light is always on when the
software and the equipment are connected normally. If the
connection fails, please check whether the AC source is normally
powered, the communication cable is connected normally, or the
IP address of computer is 192.168.1.2.