Bridge BriPower ESA Series, User Manual, Page: 104 / 112

SEQ:FREQ <NRf> None
Set output frequency inactivated step in
sequence mode
SEQ:PHASEA <NRf> None
Set the phase of output A in activated
step in sequence mode
SEQ: AMPA <NRf> None
Set the amplitude of output A in
activated step in sequence mode
SEQ:PHASEB <NRf> None
Set the phase of output B in activated
step in sequence mode
SEQ: AMPB <NRf> None
Set the amplitude of output B in
activated step in sequence mode
SEQ:PHASEC <NRf> None
Set the phase of output C in activated
step in sequence mode
SEQ: AMPC <NRf> None
Set the amplitude of output C in
activated step in sequence mode
SEQ:SWT <NRf> None Set switch time
SEQ:DUT <NRf> None Set duration
SEQ:CONDSEL
NONE/A/B/C
None
Set the selection of the type for
condition
:NONE/A/B/C
SEQ:CONDVAL <NRf> None Set the condition value for phase
SEQ:OUTPUT
ON/OFF
None Enable or Disable the output
SEQ
<NRf1><,NRf2><,NRf
3><,NRf4><,NRf5><,
NRf6><,NRf7><,NRf8
><,NRf9><,NRf11><,
NONE/A/B/C><,ON/
OFF>
None
Set the values of following parameters
for one time:
duration;
switch time;
output frequency;
the phase of output A;
the amplitude of output A;
the phase of output B;
the amplitude of output B;
the phase of output C;
the amplitude of output C;
the condition value;
the selectioncondtion;
the cmd of output
SEQ:LAB <NRf> Set the sequence step number
SEQ:LAB? SEQ:LAB<,NRf>
Inquire the sequence number of current
step
SEQ:FREQ? SEQ:FREQ<,NRf>
Inquire output frequency have been set
inactivated step in sequence mode
SEQ:PHASEA? SEQ: PHASEA<,NRf>
Inquire the phase of output A have been
set inactivated step in sequence mode
SEQ:AMPA? SEQ: AMPA<,NRf>
Inquire the amplitude of output A in
activated step in sequence mode
SEQ:PHASEB? SEQ: PHASEB<,NRf>
Inquire the phase of output B have been
set inactivated step in sequence mode