Step 2:
The input terminal (PE/N/A/B/C) and output terminal (N/A/B/C) of the equipment are shown
in Figure 2-4, pass the cable through the inlet hole at the bottom and connect it to the terminal.
Figure 2-4 Copper bar
CAUTIOUS
To avoid electrical hazards, connect the ground terminal to the protective ground
terminal before connecting any input or output terminals.
SHOCK HAZARD
Before connecting the cable, make sure that the upper-level switch is off. Do not
live working.
Step 3:
After completing the above work, the wiring status of power supply is shown in Figure 2-5.
Restore the bottom baffle, close the cabinet door, then, the equipment installation is done.
Figure 2-5 Equipment wiring completion status
I
MPORTANT INFORMATION
Users can choose whether need remote sense connection. Refer to 1.3.7.2 for specific
wiring method.