Bridge BriPower ESA Series, User Manual, Page: 58 / 112

②
Parameter
Input Mode
-SEQ
Manual setting of parameters in sequence
mode.
-ATI
Analog input via ATI interface (-ATI option).
③
Output
Mode
AC
AC output mode.
DC
DC output mode.
AC
+
DC
AC+DC output mode (-DC option).
IMPORTANT INFORMATION
Output mode-DC mode is only valid after the user selects -DC option, otherwise
the setting is invalid.
5.1.3 Input/output controls
There are some important controls on the sequence panel (Figure 5-3). Click
“
Apply
” →
“
Power On
” →“
Output On
”
(
→ “
Output Switch
”
), the power supply is on, click (
“
Output
Switch
”
)
→ “
AC Output
” → “
Power On
”
, the power supply is off.
Figure 5-3 Input/output controls
Table 5-3
Number Name Note
④
Apply
click "Apply" after the parameter setting is completed, the
parameter will take effect.
Power On
It is used for the network side on/ off. When the network
side is on, the button is green, and when the network side is
off, the button is red.