button (Figure 5-17②), the inter-harmonic setting panel will automatically pop up (Figure 5-
18). The user can set the inter-harmonic frequency, angle, content, and other parameters on
this panel. After the parameter setting is completed, check the corresponding box, and click
"Setting" → "Apply".
To cancel the inter-harmonic simulation, click the inter-harmonic setting button at the bottom
of the page (Figure 5-17②), click "Clear" in the pop-up panel to clear all parameters, click
"Setting" → "Apply" in turn, and finally cancel the harmonics by checking the box.
Figure 5-17 Inter-harmonic edit -1
Figure 5-18 Inter-harmonic edit -2