GRADISCA Restyling
rev.1- 06/2004
24
How to make cappuccino
For making cappuccino, fresh milk must be “frothed” to give a foam which will be poured over the espresso coffee.
Position the steam pipe and switch the steam on for 1 or 2 seconds to clean away milk residues.
For heating use a jug containing at least three inches of milk.
Approach the jug to the steam pipe so as to immerse the spout in the milk.
Slowly open the steam tap and move the jug in a circular fashion until the milk starts to froth.
Then quickly close the steam.
Remove the jug from the pipe and pour the frothed milk over the espresso coffee.
N.B.: the steam pipe is very hot and
should not be touched until it has cooled.
Clean the milk from the pipe as soon as possible to prevent it from drying and becoming difficult to remove.
Inform the customer as soon as possible that the drink is very hot.
Keep extra frothed milk for the next cappuccino.
How to make espresso coffee
Remove the filter holder from the group (A) and dispose of the grounds (B) by hitting the edge of the filter
holder against the bar in the apposite drawer.
Do not hit the filter holder against an unprotected surface; the filter holder’s seal could be damaged. A
smart blow should be enough. The small quantity of powder remaining will not have a negative effect on
the taste of the coffee.
Fill the filter holder with finely ground coffee, placing the filter holder in the housing provided at the bottom
of the grinder-doser (C) and pulling the lever (D) once for a single coffee and twice for a double dose.
Attention:
always remember to pull the lever to its full extent; then let it return to its rest position on its own.
When the filter holder is filled, press down the ground coffee with the special tamp, pushing the filter
holder upwards.
Clean the edge of the filter holder with the palm of the hand to get rid of excess coffee powder.
This will ensure that the seal between the filter holder and the machine will be perfect : if a filter for mixed
use is being utilized, you can put a coffee pod instead of ground coffee in it.
Fit filter holder to the machine group (E), fixing it and turning it until it is fully in. Do not tighten too much,
otherwise it will be difficult to remove after delivery.After having fitted the filter holder properly put a
previously heated cup under the spout. Two cups are required if a double filter holder(F) is used. Press
the key on key pad (digit version) or operate the push button (semi-automatic version). When delivery is
finished, remove the cup and serve it.
