a
Page
22
- Installation Manual
24805490/11-01-2013 319F90C
ver
.
1.2 -
The data and information in this manual may be changed at any time with no obligation on BRAHMS’
s par
t t
o notify anyone of this
ENGLISH
7.2 Card description
LEGEND OF LIGHT SIGNALS
1
RS-485 bus terminals for connecting keypads, remote modules and inserters.
[+,-]
power supply to bus.
[A,B] data.
7.3 User interface
The transponder inserter makes it possible to:
•
Switch on and off scenarios.
•
Switching off the system.
•
Visually checking the alarm-status and on/off status of the system.
System status
light
indicators
Sensible zone for transponder key
(see the System Management chapter)
Each key is recognised univocally inside the control unit and event history.
7 PXITxxxx Inserters
The inserters must be mounted so as to be protected from any breaking-in attempts or in an area guarded by the system -
otherwise, the reference regulation becomes not applicable.
GENERAL CHARACTERISTICS
Power supply voltage
12 Vdc - 15 Vdc
Power draw
40 mA (min) - 70 mA (max)
Working temperature
0° - 40°C
Relative humidity
25% - 75% without condensation
Dimensions
Positioned on a plug of an embedded box
IP
IP40
7.1 Features
ADDRESS
If you want to change the keypad address:
1.
Press and hold down the key for at least 5 seconds
*
.
2. With
select
ADDRESS MENU
and press
*
.
3.
Use the keys
+
-
to change the keypad address.
4. Press
#
to exit and return to the previous menus.
Changing the keypad address does not change the control unit
programming. Remember to enable any added keypads.
The "address" menu is displayed only for the first 3 minutes after control unit
has been switched on.
ADDRESS MENU
*
ADDRESS
01
▲
▼
+ -
#
