Page
46
- Installation Manual
24805490/11-01-2013 319F90C
ver
.
1.2 -
The data and information in this manual may be changed at any time with no obligation on BRAHMS’
s par
t t
o notify anyone of this
ENGLISH
STEP 2: Re-start the control unit
1.
Press the small P1 button for start up again the control unit.
2.
The keypad shows
INITIALIZATION
(remaining on display
for 10”).
STEP 3: Restoring the micro switch
1.
Set micro switch 2 to OFF.
2.
The keypad shows
INITIALIZATION
RUNNING
.
3.
Once start up is finished the control unit goes back to seeing system
status.
INITIALIZATION
INITIALIZATION
RUNNING
11.2 Factory settings
the default parameters don’t delete codes or keys already in memory.
To delete this items it’s necessary to enter in the specific menu.
To set all the devices to the default parameters do as follow:
1.
To access the Technical Menu press the
/ESC # key for 5 sec
followed by the User code (if under 6 digits confirm with
*
).
2. Press
the
/ESC # key for 5 sec and enter the Technical code.
3. With
select
DEFAULT PARAMETERS
and press
*
.
4. With
A
confirm or
#
to cancel.
08:23 16/05/10
ENTER CODE
123456
STANDING BY
*=USER MENU
222222
DEFAULT 26
PARAMETERS
▼ ▲
+
1
2
3
4
5
6
7
8
–
+
–
U1 U2 U3 U4 NO
C
NC
T
–
F1
F5
+
A
B
BUS
+
IN
AUX
POS
M2
M4
P1
CN6
M6
M7
SW1
JP3
O.C
RELAY
TAMPER
Vac
M1
CN3
CN2
CN1
1 2 3 4
ON
+BA
T
–BA
T
JP1
CN5
CN4
DEFAULT PARAM.?
*=YES #=ESC
RESTORE CODES?
*=YES #=ESC
RESTORE KEYS?
*=YES #=ESC
*
*
*
DEFAULT PARAMET.?
RUNNING
ARE YOU SURE?
A=YES #=ESC
ARE YOU SURE?
A=YES #=ESC
ARE YOU SURE?
A=YES #=ESC
RESTORE CODES
EXECUTING
RESTORE KEYS
EXECUTING
A
A
A
