Page
27
- Installation Manual
24805490/11-01-2013 319F90C
ver
.
1.2 -
The data and information in this manual may be changed at any time with no obligation on BRAHMS’
s par
t t
o notify anyone of this
ENGLISH
OPENING/CLOSING THE CONTROL UNIT
If the control unit tamper is properly installed, when the control unit door is opened the sabotage- allarm will sound immediately.
For alarm not to sound, access technical menu via keypad.
STEP 1: Opening the control unit
1.
Enter user code (if less than 6 characters confirm with
*
).
2.
Enter technical code to access technical menu.
3.
Open the control unit by loosening the apposite screws.
STEP 2: Placing the control unit in maintenance
To prevent alarms from being raised due to control unit tamper or due to possible
programming errors, we suggest placing the control unit into maintenance mode.
1.
Place the control unit into maintenance mode
ON
1
by raising microswitch 1.
STEP 3: Maintenance
This setting allows the user to perform operations without risk of unwanted siren or
telephone call tripping.
STEP 4: Making operational and shutting down the control unit
Once maintenance is finished restore the system to operational mode.
1.
Place the control unit into operational mode
ON
1
lowering microswitch 1.
2.
Close the control unit within 30” before the control unit’s tamper alarm is triggered.
08:23 16/05/10
ENTER CODE
123456
STANDING BY
*=USER MENU
222222
9.2 Using the control unit keypad
BUTTON
KEY LEGEND
*
,
#
, ,
,
C
,
D
Menu navigation and selection keys.
+
,
-
Edit parameters keys.
*
After inserting the code it lets you access the User Menu or to confirm a selection.
A
,
B
,
C
Scenario launching key.
D
System switch-off button.
