Brady BMP71 User Manual Download Page 95

Page: 95 / 147

Printing

Adv Print

BMP71 User’s Manual

To separate different labels on continuous media, add a separator

Figure 28 • Separators

Navigate to the Separator field and press OK

or Enter

From the drop down list, select the separator to use and press OK

or Enter

Mirrored print takes all data on a label and flips it to provide a mirror image. Mirroring
displays on the printed label only.

Figure 29 • Mirror image

Mirrored print is label-based, meaning all data on the label is mirrored. You cannot mirror data
in an individual area.

To provide a mirror image of label contents:

Navigate to the

Mirrored Print

option box and press OK

or Enter

When finished with desired options, navigate to the OK button and press OK

Enter .

Line Separator

Tic Separator

Summary of Contents for BMP71




















































































































































Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands

Brady BMP71, User Manual

Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands