Brady BMP71 User Manual Download Page 87

Page: 87 / 147

Serialization

Edit a Sequence

BMP71 User’s Manual

For Linked serialization:

Note

Linked serializations do not have to display at the same position on the label. They
can be in separate locations within the label.

15.

Navigate to the Linked option box.

16.

Press OK

or Enter

17.

Navigate to the OK button and press OK

or Enter

The total number of labels to be printed in the sequence displays in the Status Bar (i.e., Label #
of ##).

Edit a Sequence

You can change the serialization values after a sequence has been determined. To edit the
sequence values:

Press Serial

The Serial dialog box displays with the current values listed.

Move to the value fields to change and enter the new value.

Navigate to the OK button, and press OK

or Enter

Summary of Contents for BMP71




















































































































































Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands

Brady BMP71, User Manual

Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands