Brady BMP71 User Manual Download Page 39

Page: 39 / 147

Setup

Setup Language

BMP71 User’s Manual

Setup Language

The following settings can be found under the Language menu in the Setup function.

Figure 7 • Language settings in Setup function

Initial Language Setup

When turning the printer on for the first time, immediately go to the Setup function and choose
the language in which you want all printer menus, functions, and data displayed.

Press Setup

Navigate to Language and press OK

or Enter

In the

Language

field, press OK

or Enter

Use the up/down navigation keys to select the desired language.

Press OK

or Enter

to accept the choice.

Navigate to the OK button and press OK

or Enter

To remove the Setup main menus from the screen:

Press Clear/Esc

Summary of Contents for BMP71




















































































































































Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands

Brady BMP71, User Manual

Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands