Brady BMP71 User Manual Download Page 60

Page: 60 / 147

Formatting

Font

BMP71 User’s Manual

You can manually enter an expand/condense percentage.

Press Font

Choose

Exp/Cond>Custom

, then enter the percentage desired.

OR
Choose

Exp/Cond

and enter the first number of the desired percentage

This immediately launches the Custom entry box.

Finish entering the percentage number in the entry box.

Press OK

or Enter

The Custom option supports whole numbers between 50% and 200%.

While entering data, the expand or condense attribute stays on until it is returned to 100%, or
until you move to a new area or label.

To expand or condense pre-existing data:

Hold Shift

while moving the cursor across the characters that are to be expanded or

condensed.

This highlights the data.

Press Font

Choose

Exp/Cond>

percentage

desired.

Press OK

or Enter

All highlighted text takes on the attribute.

Summary of Contents for BMP71




















































































































































Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands

Brady BMP71, User Manual

Search results

Summary of Contents for BMP71

Reviews:

Related manuals for BMP71

Brands by name

Popular brands