Brady BMP71, User Manual

Page: 51 / 147

Getting Started
Editing Text
40
BMP71 User’s Manual
Font Size
Font size is applied on a line-by-line basis. If the size is changed before the data is entered, all
the data in the current and subsequent lines, takes on the new font size until font size is
changed again.
Changing the font size on pre-entered data changes the size on the entire line, regardless of
where the cursor is in the line. However, the font size will not change on subsequent lines of
pre-entered data. You must change the font size on each individual line of pre-entered data.
Note Note
The Font (typeface) is determined in the Setup menu (see page 27 ). T
he font
selected applies to the entire label file only.
Autosize
Autosize starts with the largest font size that fits on the label. When a line of text reaches the
edge of a label it scales downward until you press [Enter] or the minimum font size is reached.
When working with autosize and multiple lines of text, all lines on a label maintain the same
size.
By default, autosize is turned on for all labels and is displayed as an ‘A’ in the upper left corner
of the Status Bar.
Figure 15 • Text entered with Autosize turned on