70
20. Using a 9/16” or 14mm socket and wrench, remove the nut
from the Left Crank Assembly.
21. Adjust the Crank Puller until the end of the Bolt is inside the
Nut (as shown).
22. Carefully thread the Crank Puller into the Left Crank Arm.
Be sure the Crank Puller has at least three rounds of threads
inserted.
23. Using a 16mm wrench, turn the inner portion (the Bolt) of the
Crank Puller clockwise. The Left Crank Arm will slide off as it is
tightened.
Note:
Be aware that the Left Crank Arm will be loose and will
need to be supported.
24. Remove the Crank Puller from the Left Crank Arm.
Bolt
Nut
Left Crank Assembly
Left Crank Assembly
