Bowflex Max Trainer M7 Service Manual Download

Page: 137 / 139

137

NOTICE:

This document provides instructions for the replacement of the Wireless Heart Rate Sensor on the Bowflex Max Trainer

M7.

If you need assistance, please call

Bowflex

Customer Service at 1-800-605-3369.

1. Unplug the AC Power Adapter from the machine and wait 5 minutes.

2. Using a #2 Phillips screwdriver, remove the indicated screw from the

Rear Shroud.

3. Carefully remove the Rear Shroud from the machine. Place a standard

screwdriver behind and near the middle of the Rear Shroud and gently pry

until it releases. Then move the screwdriver to the bottom and gently pry

until the Rear Shroud comes off.

View of the exposed opening (behind Rear Shroud) showing the location

of the Wireless Heart Rate Sensor and Cable:

To reduce the risk of electrical shock or unsupervised usage of the equipment, always unplug the power cord from the

wall outlet and the machine and wait 5 minutes before cleaning, maintaining or repairing the machine. Place the power

cord in a secure location.

Rear Shroud

Wireless Heart

Rate Sensor

Wireless

Heart Rate

Sensor Cable

Summary of Contents for Max Trainer M7












































































































































Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands

Bowflex Max Trainer M7, Service Manual

Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands