14
NO
Does the resistance
respond now?
YES
Does the fan
rotate when pedaling
the machine?
Is the metal tension
cable broken?
Is the red, magnetic
brake arm broken?
Does the console turn
on?
Does the fan turn
freely?
Resistance Does Not Respond
BEGIN HERE
YES
Plug the power cord back in, and power up the display. If the inlet wire
was unplugged, plug it back in.
Go to Troubleshoot-
ing:
Machine Seized
Up
NO
Cycle the power off/on.
If the issue persists
continue on with the
troubleshooting.
NO
YES
YES
Replace the Servo
Motor.
Go to Troubleshoot-
ing:
No Power
Replace the console.
Press
“START / ENTER”
twice.Does the motor move
when pressing the increase or
decrease resistance buttons?
Visually watch the motor.
NO
Remove the right side
lower round cover.
Issue resolved.
Replace cable to Speed
Sensor.
Does the
increase resistance level
button on the console
make a clicking noise
when you press it?
Visually inspect the
motor. Check to make
sure that the metal cable
is properly attached to
the motor and the brake
arm.
Has the
metal tension cable
come off track, or need
adjustment?
Go to Troubleshoot-
ing:
Rubbing / Belt
Replace the cable.
Replace the brake
assembly.
Reattach / adjust the
tension cable
NO
NO
NO
NO
YES
NO
YES
YES
YES
YES
