Bowflex Max Trainer M7 Service Manual Download Page 24

Page: 24 / 139

Telemetic Heart Rate Issues

BEGIN HERE

Ensure strap is “POLAR” compatible

and uncoded. Make sure strap is

against the bare skin, just below the

chest muscles, and buckle it. Ensure

it is facing up and the contact areas

are damp.

If the belt is dirty, remove it, and clean

it with mild soap and water, and

thoroughly dry it.

Make sure the Heart Rate Strap

Transmitter operates in the

4.5kHz – 5.5kHz range. If using

the Heart Rate Strap that came

with the machine, skip this step.

Move the machine away from

sources of potential electromag-

netic interference such as TV,

computers, microwave, cordless

phones, etc.

Replace the Heart Rate

Chest Strap

Does the issue

persist?

Issue resolved.

YES

Replace the Wireless

Heart Rate Module

Replace the Console

Assembly

Does the issue

persist?

Issue resolved.

YES

Does the issue

persist?

Issue resolved.

YES

Summary of Contents for Max Trainer M7












































































































































Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands

Bowflex Max Trainer M7, Service Manual

Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands