Bowflex Max Trainer M7 Service Manual Download

Page: 129 / 139

129

NOTICE:

This document provides instructions for the replacement of the Speed Sensor on the Bowflex Max Trainer

M7.

If you need assistance, please call

Bowflex

Customer Service at 1-800-605-3369.

1. Unplug the AC Adapter from the wall outlet and machine.

2. Remove the Right Stabilizer Shroud from the machine.

3. Using a #2 Phillips screwdriver, remove the indicated (by ovals) screws

and only loosen the lowest indicated screw (arrow) from the Right Fan

Cover.

Note:

Loosen the lowest screw by at least 3 full rotations.

4. The Right Fan Cover has a tab that needs to be pushed upward to clear

the loosened screw. While pushing up on the tab, remove the Right Fan

Cover from the assembly.

Note:

the Power Cable is attached to the inside of the Right Fan Cover.

Be sure not to crimp the cable by placing the Right Fan Cover close to the

front of the machine.

To assist with assembly, note that the upper

screw is a machine screw and not a self-tapping

screw.

Power Inlet

Power Cable

Summary of Contents for Max Trainer M7












































































































































Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands

Bowflex Max Trainer M7, Service Manual

Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands