Bowflex Max Trainer M7 Service Manual Download

Page: 84 / 139

5. Using a #2 Phillips screwdriver, remove the indicated (by ovals)

screws and only loosen the lowest indicated screw (arrow) from the

Right Fan Cover.

6. The Right Fan Cover has a tab that needs to be pushed upward to

clear the loosened screw. While pushing up on the tab, remove the

Right Fan Cover from the assembly.

Note:

the Power Cable is attached to the inside of the Right Fan

Cover. Be sure not to crimp the cable by placing the Right Fan Cover

close to the front of the machine.

To assist with assembly, note that the

upper screw is a machine screw and not a

self-tapping screw.

7. Remove the indicated Cap from the machine.

8. Using a 6mm hex wrench, remove the hardware exposed from

below the Cap.

9. Slide the Right Leg Assembly off of the machine.

Power Inlet

Power Cable

Cap

Leg

Assembly

Summary of Contents for Max Trainer M7












































































































































Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands

Bowflex Max Trainer M7, Service Manual

Search results

Summary of Contents for Max Trainer M7

Reviews:

Related manuals for Max Trainer M7

Brands by name

Popular brands