Boston Whaler 420 OUTRAGE, Owner'S Manual

Page: 70 / 268

2-22
Chapter 2 • General Information
420 Outrage
R
Buttons and Switches
Basic button/switch use on the throttle and shift
control are detailed below (see Figure 2.21.1).
Neutral LED
Illuminates when engines are in neutral gear position.
Trim All Engines
Raises and lowers all engines.
Start/Stop All Engines
Starts or stops all engines sequentially from port to
starboard.
Start/Stop Individual Engines
Starts or stops an individual engine.
Display Screen (Optional)
Shows pop-ups for advanced features as well as
system information and faults.
Trim Individual engines
Raises and lowers individual engines.
Brightness
Increases and decreases brightness on control unit.
1 Lever
Enables throttle and shift functions of all engines to
be controlled by the port lever.
Transfer
Transfer boat control to a different helm.
Throttle Only
Increase engine RPMs without shifting into gear.
Active Trim
Turns the Active Trim feature on or off.
Profile
Changes the selected Active Trim profile.
REFER TO ENGINE MANUFACTURER’S
MANUAL IN OWNER’S PACKET FOR
COMPLETE INSTRUCTIONS AND WARRANTY
INFORMATION.
Ensure continuous visibility of other boats,
swimmers and obstacles during bow-up
transition to planing. Adjust engine to an
intermediate trim as soon as boat is on plane
to avoid possible ejection due to boat spinout.
Do not attempt to turn boat when the engine is
trimmed extremely down, under or in.
NOTICE
Shift controls into neutral before starting engine.
Shift only when engine is at idle. Reversing at
high speeds can cause flooding/swamping due
to water being pushed over the transom.
!
CAUTION
Wind and sea currents can change how this
vessel responds while in motion. Understanding
this vessel and its reactions at speed will make
boating safer and more enjoyable.
NOTICE
VesselView
®
This vessel is equipped with the VesselView display.
VesselView allows the operator to receive critical
operational information, displayed clearly and
instantly at the helm display. The system continuously
monitors and reports information ranging from basic
operating data to detailed vessel environmental
information.
System Calibration
Boston Whaler or your dealer has calibrated
VesselView to the boat’s equipment. If equipment is
added, the system must be recalibrated.
FOR RECALIBRATING OR MANUFACTURER
INFORMATION, REFER TO OWNER’S PACKET.
FOR COMPLETE INSTRUCTIONS AND WARRANTY
INFORMATION.
VesselView Mobile (Option)
If equipped, VesselView Mobile connects the data
network to your iPhone or android mobile device.
With VesselView Mobile you can connect on your
mobile device with all the digital data your engine
supports plus new features such as maintenance
reminders, mapping, performance summary, and fault
code diagnostics.