Boston Whaler 420 OUTRAGE, Owner'S Manual

Page: 135 / 268

3-41 420 Outrage
Chapter 3 • Systems Overview & Operation
420 Outrage
R
Radial Outriggers (Option)
Maintenance
With very little care your equipment will maintain its
appearance and operate trouble free. When at port,
extend the outriggers and flush with fresh water,
wipe with a dry cloth and allow to air dry. When dry
collapse the outriggers to the stowed position.
REFER TO OWNER’S PACKET FOR COMPLETE
INSTRUCTIONS AND WARRANTY INFORMATION.
1
2
3
4
ROTATION ADJUSTMENT HANDLE
LOWER UNIT
UPPER UNIT
HARDTOP
2
3 4
Radial Outriggers (Option)
Fig. 3.41.1
1
If equipped, there are two radial outriggers. One
each located on the port and starboard side of the
hardtop. The outriggers are adjustable to provide
ease of operation and convenient ready-to-use
storage. The outriggers use the same handle for
raising, lowering, and swinging the outriggers.
With the handle in the “down”
position use the knob for
grip and rotate the handle
clockwise to raise or lower
the outrigger in the desired
position.
To Raise and/or Lower the Outriggers:
Once the desired height
is reached, flip the handle
to the “up” position. Grab
firmly on the handle, and
rotate the handle to position
the outrigger to the desired
fishing position.
To Swing the Outriggers in and/or out:
Leaving the base in the down position will keep the
base from rotating while fishing and running.
Operation
To extend the outriggers:
Starting with the outboard
section, extend each section out
until the locking button snaps
into place.
Starting with the inboard most
section, push in the locking
button on each section and
insert sections into the shaft
until all sections are completely
seated in the stowed position.
To retrieve the outriggers:
Always ensure clearance of bridges, lights,
power lines, etc. while operating your vessel.
!
CAUTION
ATTENTION
The outriggers have an operable angle (up and
down) of 65 degrees to 10 degrees. Please keep
this in mind when making adjustments to your
outriggers.
Thermal Night Vision (Option)
Thermal Night Vision (Option)
Fig. 3.41.2