Step 1. Connecting the IntellaTip MiFi XP Conventional Bipoles as a standard ablation catheter
a. Connect Dispersive Surface Electrode(s) to the Velocity EPT GenConnect Module.
b. Connect M004
620
0 Cable to the Filter Module (yellow plug) and the Velocity EPT GenConnect
(red plug)
.
c. Connect the M004
620
0 Cable
(black plug)
into the IntellaTip MiFi XP Ablation Catheter.
d. Connect Dispersive Interconnect Cable (SJM 100010915) to the Maestro Pod Dispersive Pad Inputs.
e. Connect Catheter Interconnect Cable (SJM 100010397) to the Maestro Pod Catheter Input.
f. Connect the M004
653S
0 Cable into the Pod. Pin out conventional Bipoles into the Pin Connection Box.
Step 2. Connecting the IntellaTip MiFi XP Mini Electrodes as a separate diagnostic catheter
a. Connect the M004
653S
0 Cable plug into the green port marked “Recording System” on the Filter Module.
Connect the pins to the Catheter Pin Connection Box.
b. Pin out the Mini Electrodes (MEs) - D, 2 and 3. Pin 4 is not used, but can be plugged into any unused channel.
c. Do Not Connect the Reference Cable (M004 3636 0) when using the EnSite Velocity System.
(Green)
(Black)
(Yellow)
Velocity EPT GenConnect
Catheter Pin Connection Box
Pannel on the front
of the Amplifier
IntellaTip MiFi Filter Module
M004 1212 0
IntellaTip MiFi XP Catheter
Maestro 3000 Cardiac
TM
Ablation Controller
RF Ablation Pod
M004 21860T 0
Dispersive Indifferent Patch
(Commercially Available)
IntellaTip MiFi XP Cable
M004 620 0
M004 653S 0
Cable: Filter Module
to Recorder
(Red)
Cable: Pod to Recorder
M004 653S 0
Do Not Connect the Reference Cable
IntellaTip MiFi
™
XP Ablation Catheter
Basic Set Up with Ensite
™
Velocity
™
Cardiac Mapping System
14
IntellaTip MiFi
™
XP
Temperature Ablation Catheter
System Set Up with Stockert EP-Shuttle RF Generator
IntellaTip MiFi
™
XP
Ablation Catheter
Basic Set Up with Ensite™ Velocity™ Cardiac Mapping System
13
